Web Analytics
MARKETS
S&P 500 7,340.53−76.06 · −1.03%
Albemarle 87.67−0.49 · −0.56%
SQM 51.59+0.46 · +0.90%
Lithium ETF 56.42−0.42 · −0.74%
Lithium Americas 1.41+0.00 · +0.00%
Pilbara 2.60−0.04 · −1.52%
Green Energy

TDK Targets EV and Data-Center Power With New Contactors

TDK's new high-voltage contactors cover EV batteries, industrial storage and AI data centers, with distinct voltage and short-circuit ratings for each.

Ross Calloway 3 min read
spring cleaning, sensor cleaning, sensor, cleaning, camera, clean, wash up, to clean, canon, 550d, innenleben a camera, mirro

TDK introduced the HVC28 and HVC29 gas-filled DC contactors for automotive systems up to 1,000 V and industrial power systems up to 1,500 V, respectively.

TDK has introduced high-voltage switching components aimed at electric vehicles, industrial energy storage and AI data centers, pairing a shared physical format with different electrical ratings for automotive and industrial applications.

The HVC28 series is designed primarily for automotive systems operating at up to 1,000 V DC, while the HVC29 targets industrial systems at up to 1,500 V DC. Both are contactors: electrically controlled switches that connect or disconnect high-power circuits. The product specifications were detailed by Charged EVs.

The distinction is not simply that one series handles a higher voltage. Their different short-circuit capabilities and intended applications make fault performance, as well as normal operating voltage, central to choosing between them.

Different fault ratings for vehicles and industrial power

Both series offer continuous current ratings of 300 A, 400 A, 500 A and 600 A. That gives equipment designers the same set of normal-current options across the automotive and industrial ranges, despite their different voltage limits.

The HVC28 has a specified short-circuit current capability of 16 kA for 5 ms. Separately, under specified resistive-load test conditions, it can perform one maximum cut-off operation at 1,600 A and 1,000 V. These are distinct specifications: the short-duration fault-current rating should not be read as an equivalent current-interruption rating.

Separately, under specified resistive-load test conditions, it can perform one maximum cut-off operation at 1,600 A and 1,000 V.

Its intended uses include traction batteries in passenger and commercial vehicles, battery disconnect units for electrified vehicles, high-voltage junction boxes and DC fast-charging stations. Those applications place the switch in the power path between batteries, vehicle equipment or charging infrastructure.

The HVC29 has a short-circuit current capability of 6 kA for 5 ms. TDK identifies energy storage systems, solid-state transformers, uninterruptible power supplies and DC fast-charging stations as industrial applications. It also says the series can support 800 V DC power architectures for AI data centers, extending its potential use beyond vehicle-related equipment.

Shared packaging and optional switching feedback

The two series use a ceramic, gas-filled chamber to interrupt DC current. Their main terminals are polarity-free, allowing current to flow in either direction rather than requiring a fixed direction through the contactor.

Both measure 95.5 by 96 by 49 mm. The HVC28 weighs about 640 g and the HVC29 about 630 g, with both specified to operate from -40°C to 85°C. Their 12 V and 24 V single-coil versions each consume 6 W at nominal voltage. An integrated connector handles the low-voltage connections.

For systems requiring feedback on switching status, TDK offers an optional normally closed mirror contact. It is mechanically linked to the main contact, providing a way to monitor its state in safety-relevant automotive and industrial equipment rather than relying solely on the command sent to the switch.

TDK says the contactors are CE- and UKCA-compliant and certified to UL 60947-4-1. The optional mirror contact complies with IEC 60947-4-1. Together, the specifications distinguish the products by voltage and fault capability while retaining common packaging, control-power options and monitoring features.

Key facts

  • Automotive voltage: HVC28: up to 1,000 V DC
  • Industrial voltage: HVC29: up to 1,500 V DC; supports 800 V DC AI data-center architectures
  • Continuous current options: Both series: 300 A, 400 A, 500 A and 600 A
  • Short-circuit capability: HVC28: 16 kA for 5 ms; HVC29: 6 kA for 5 ms

Sources

Photo: pixel2013 · Pixabay Content License — source

Filed under Green Energy

More on Green Energy

See all →